Quick answers to technical questions may be found in our FAQ list. It is structured according to the following product groups: Doppler SODAR PCS.2000 (SDR), Sonic Anemometer uSonic (SNC), Micro Rain RADAR (MRR), Temperature Profiler (RASS), Doppler Cloud RADAR (MIRA), Doppler LIDAR Wind Ranger (LDR-WR) and Doppler Wind LIDAR Streamline (LDR-SL).
Pleas note that this site is still in progress. If your product or question does not show up in our list, please use the contact field below and we will come back to you shortly.
The scattering of acoustic pulses propagating through the atmosphere is generated by turbulent density fluctuations (velocity and temperature). In case of backscattering used typically for commercial sodar systems only turbulent temperature fluctuations contribute.
Therefore, low turbulence as observed during stable stratification and/or calm winds creates a significant decrease of the received signal intensity. High environmental noise raises the noise floor and further decreases the signal quality (i.e. the signal noise ratio, “SNR”). During strong convective conditions the high turbulence may allow under perfect conditions measuring ranges up to 1000 m and more. On the top of the boundary layer rapid decrease of SNR is observed limiting the maximum range of useful sodar data. In many situations the SNR becomes insufficient already far below the top of the boundary layer.
The atmospheric attenuation of sound depends on temperature and humidity, and as a rule, dry and cold environments increase attenuation while wet and warm environments decrease attenuation.
In moderate rain conditions the noise of the rain drops hitting the loudspeakers of the acoustic antenna will raise the acoustic background noise and will reduce SNR to some extent, in heavy rain showers the sodar data could temporarily be missed completely.
In principle, a sodar system can easily measure under foggy conditions and also inside clouds, contrarily to Doppler lidar systems. However, as foggy conditions are often related to low turbulence the height availability might be reduced.
The METEK internal record of a maximum measuring height of 1600 m was achieved at a costal site in Southeast Asia. Strong winds and significant orographic structures created a strong backscattered signal while the attenuation at 35° C and 90 % humidity was low. In the Arctic on a flat, closed ice flow the maximum measuring height can be low as 50 m.