Quick answers to technical questions may be found in our FAQ list. It is structured according to the following product groups: Doppler SODAR PCS.2000 (SDR), Sonic Anemometer uSonic (SNC), Micro Rain RADAR (MRR), Temperature Profiler (RASS), Doppler Cloud RADAR (MIRA), Doppler LIDAR Wind Ranger (LDR-WR) and Doppler Wind LIDAR Streamline (LDR-SL).
Pleas note that this site is still in progress. If your product or question does not show up in our list, please use the contact field below and we will come back to you shortly.
The MRR standard signal processing software assumes and is adapted to the liquid phase of precipitation. It is optimized for deriving drop size distributions and for corresponding integrals as rain rate and liquid water content.
In case of snow (or graupel, hail) the standard signal processing does not provide physically meaningful results, because the relations of scattering cross section versus mass and fall velocity are very different for ice crystals than for water droplets. Moreover, certain frequency intervals of the raw spectra are discarded in order to achieve stable results (see e.g. Peters et al., 2005). Particularly in case of snow the main spectral power can be concentrated in these discarded frequency ranges resulting in a seemingly low radar sensitivity.
Maahn and Kollias (2012) have developed a special algorithm for snow detection, which is available on the web mrr_snow. The input needed for initialization is the raw spectrum as provided by the MRR. This algorithm provides reflectivity and higher spectral moments of snow echoes with enhanced sensitivity and has been checked by the authors against simultaneous measurements with a more sensitive cloud radar.